Name: Temperature Temp Sensor For Roasting Pans
■ Features
| Band: Veteng | Use: For temperature sensing |
| Product model: VTSF1204FZ025 | Operating temperature range: - 30℃ ~ +270℃ |
|
Agency recognition: UL ROHS |
NTC workin Temp.Rage: - 40℃ ~ +270℃ |
■ Product Drawing
■ Material List
| Item | Material | datasheet | Quantity |
| 1 | CAP | Φ5*20+12*20 Stainless steel shell | 1PCS |
| 2 | TUBE | Teflon casing | 1PCS |
| 3 | TUBE | White fiberglass sleeve | 1PCS |
| 4 | TUBE | White fiberglass sleeve | 1PCS |
| 5 | Wire | UL10362 #26*2C TS Black | 1PCS |
| 6 | NTC Thermistor | R25=200KΩ±1% B25/50=4140K±1% | 1PCS |
| 7 | Housing | XH-2Y | 1PCS |
■ Electrical Characteristic
| NO. | Item | Symbol | Test Conditions | Min. | Nor. | Max. | Unit |
| 1 | Resistance at 25℃ | R25 | Ta=25℃±0.05℃
PT≦0.1mW |
198 | 200 | 202.00 | KΩ |
| 3 | B Value | B25/100 | 3853.887* LnK | 4099 | 4140 | 4181 | K |
| 4 | Thermal Dissipation Constant | δ |
Ta=25℃ (in air) |
/ | 5.0 | / | m W/℃ |
| 5 |
Response Time-In liquid |
τ |
25℃ →85℃ T1=25+(85-25)*63.2%=62.92℃ |
/ | / | 15 | Sec |
| 6 | Hi-Pot Test | / | AC1500V 3Sec | / | / | 0.5 | mA |
| 7 | Insulation test | / | DC500V 1Sec | 100 | / | / | MΩ |
● The resistance, B value and other parameters can be selected as your requirements
■ Mechanical Tests
| NO. | Item | Pass Criteria | Test Conditions |
| 1 |
Pull Test |
Not loose, no deformation |
The connection strength between housing and wire， pull≥1KG(9.8N) |
| 2 |
Drop Test |
Appearance no obvious damage |
At the height of 1 meters, the product falls freely and falls to the 10mm thick oak board, 5 times |
■ Reliability Tests
| NO. | Item | Pass Criteria | Test Conditions |
| 1 |
High Temperature Storage |
⊿R/R25≤±3% No visible damage to appearance |
125±5℃，1000±24H After the test, wait at normal temperature for 2 hours |
| 2 |
Low Temperature Storage |
-30±5℃，1000±24H After the test, wait at normal temperature for 2 hours |
|
| 3 |
Constant temperature and humidity test |
40±2℃，90%～95% RH,100H±24H After the test, wait at normal temperature for 2 hours |
|
| 4 |
Temperature impact test(in air) |
–30℃×30min→25℃×5min→105℃×30 min→25℃×5min，Cycle 10 times After the test, wait at normal temperature for 2 hours |
■ Soldering Iron Setting
| NO. | Item | Settings/Parameters |
| 1 | Temperature of Soldering Iron-tip | T≤360℃ |
| 2 | Soldering Time | S≤3Sec |
| 3 | Distance From Thermistor | L≥10mm |
■ Storage Conditions
1 Ambicnt Temperature: -10℃～+40℃
2 Relative Humidity: ≦75%RH
3 Keep away from corrosive atmosphere and sunlight
4 Period of Storage: 1 year
■ Product Application Conditions
1 Maximum service temperature and maximum power in application should not exceeds specification listed in Product Specification;
2 Much be handled with care when moving and installing the product;
3 Product should not be used when deformed or rusty casing is observed on product;
4 Product should not be used when broken housing ,or excessive deformation on housing is observed;
5 Avoid excessive temperature fluctuation when operating the product in its operational temperature range;
6 Do not apply excessive shock and vibration on product;
7 Do not pull or bend the lead wire excessively;
8 Do not use in any ambient with corrosiven gas (CO2,NH3,Sox,Nox);
Do not use in any ambient with electrolytic solution with brine,acid,alkaline and organic
9 Do not use in environment with water.high moisture,and high corrosive solution;
10 Current throught NTC element will cause self-heating,and may affect the measurement;
11 This product belongs to surface appressed type sensor temperature, when using, need to make bottom plane fully and heating;
● We are so happy to answer any questions. send a message or E-mail to us. We will respond as soon as possible.
● Ordering process：Confirm the product and datasheet → Send samples → Confirm samples and quotes → Test passed → Order+ payment → Manufacture+payment → Deliver
● Because the temperature sensors are custom products, can only be ordered in bulk and not retail
● For other NTC temperature sensors not listed on this website, please contact us, Yes, direct procurement from China is so easy
● The Shell, component, wire, connector, and their color, size, shape, and processing methods， all can
be customized according to your design
● The special shape of the shell and component, we can cooperate with the design and manufacture of
new molds
● If you need some samples, please contact us
Copyright 2019 All Right Reserved.
